PRODUCT   : TEJA COVER FLUX T-101(Covering & Drossing Fluxes)
COLOUR   : Pink
APPLICATION RATE  : 0.5 – 1.5% of Melt Weight.
DROSS TYPE  : Powdery (Dry)
MELTING UNIT  : Crucible & Electric Furnace.
ALLOY TYPE  : All Alloys except those containing more than  1% of Mg
REMARKS   : Teja Cover Flux T-101 is used for general Purpose Covering& Drossing
PRODUCT FUNCTION  :
Protects liquid metal from oxidation and also cleans the melt by absorbing oxide inclusions, its exothermicity melts down aluminium beads to return it to the molten metal.
METHOD OF USAGE  :
Half the Quantity of the Flux to be used is added at the time of melting down & the remaining quantity is added as soon as the complete charge is molten & ready for pouring till the dross becomes red & powdery. The Protective Flux cover should not be removed until the time of degassing & Grain Refining.
ADVANTAGES  : 1. Curtails Oxidation of metal which prevents melt loss.
2. Removes Oxide inclusions
3. Reduces Gas pick-up.
4. Washes out Non-Metallic Particles.
5. Gives Clear Separation of Slag & Metal.
6.. Reduces Metal content in dross.
PACKING  : Strong Polythene lined 25kgs HDPE Bags
STORAGE  : Always keep the material at dry place in Air-tight condition to avoid moisture pick-up
NOTE  :
The above given application rates and datas are approximate values only. Actual values to be arrived at shop floor depends upon the charge mix, composition of the alloy, type of the furnace and metal temperature etc.